top
3
2



SPECIFICATIONS:  
Housing: Aluminum Castings
Support Aluminum Casting
Lamp LED Lamp
Mask Assembly Three Color
Power Input 90 to 264 VAC
24VAC upon request
Dimensions Height 12 inches
Width 8 inches
Length 16 inches
Finish Orange Polyester

 



Visual Approach Slope Indicator LED Version
Model 800 LED

Designed to meet the special requirements of helicopter landings



The Helicopter Visual Approach Slope Indicator (VASI) was developed as landing aid for helicopter flight, to accommodate their steeper angles of descent and deliberate speeds, as compared to the conventional fixed wing VASI systems.

Three wide horizontal beams of different colored light are projected in fan shaped array into the incoming flight pattern. The top beam (yellow) indicates a too high altitude of approach. The center beam (green) is the correct altitude and the lower beam (red) is a too low altitude. By staying within the green light beam, the correct slope is maintained to touchdown. An ideal control for training students.

The LED lamp is of very high intensity and has a rated life of at least 50,000 hours. It is powered by 90 to 264 volts AC current with a frequency range from 47 to 63Hz. The LED lamp consumes a tenth of the power of the regular halogen bulb, which creates a big saving in power consumption.

The VASI is normally placed on the border of the safety area on the near side, facing into the landing pattern. It has a low profile, being 12 inches high, 8 inches wide and 16 inches long and is constructed of heavy cast aluminum that is weather tight and finished in an orange polyester power coating.


contact us

1
1
Lighting System
arrow Surface Floodlighting
 
arrow
arrow
arrow Glide Path Indicator (VASI)
arrow Locating Beacons
arrow Obstruction
Lighting
arrow Radio Receiver Controller
arrow Windcone Assembly
1
1